The characteristics and application of EVA sole

by:BEF     2020-06-29
A profile, product also called EVA

EVA sole pads, are made from EVA foam and two parts, double-sided adhesive, EVA foam as base material, the single side or double side joint domestic oil glue or 3 m, NITTO NITTO, TESA palisade, sand, SONY SONY, big DIC Japan, Hib Hitachi, imported double-sided tape, and then use high precision die cutting machine or punch stamping die cutting and into.

2, adhesive products

according to the following methods of operation, enhanced bonding effect can be obtained:

1, soles' target='_blank'>EVA soles adhesion surface shall be clean, dry, general advice to dab 1:1 IPA ( Isopropyl alcohol) With the mixture of water to brush try clean on the surface, surface is completely dry.

2, after being dry cleaning solvent, take EVA rubber gasket joint at the adhesive surface, about 15 psi (in drum or other way to 1. 5 kg/cm2) The pressure, the effective bonding.

3, tear tape from type paper, then need to laminating material labeled, same with 15 psi pressure, make its effective joint. If you want to get rid of the bubble, should increase the pressure, in order to items can withstand the limit for the ceiling.

4, paste the ideal temperature for 15 Don't less than 38 ℃, 10 ℃.

5, adhesive tape, should with one end of the first joint, slow pressure again to the other end, in order to reduce the risk of air bubbles. Three, product storage

stored appropriate environmental requirements: the temperature is 19 - 23 ℃, humidity 40 - 60%.

4, product characteristics conductive Eva/Eva sole has good elasticity and abrasion resistance, air tightness, harmless to the human body.

water resistance: closed bubble pore structure, non-absorbent, moisture-proof, waterproof properties is good.

corrosion resistance: resistance to oil, acid, alkali and other chemical corrosion, antibacterial, non-toxic, tasteless, no pollution.

shock: resilience and high resistance to tension, high toughness, good shockproof, anti-skid, buffer performance. Application range

EVA sole mainly for electronics, electrical appliances, high-tech products, home 倶, toys, hardware and plastic, printing panel industries such as the choice of shockproof, buffer, anti-skid. Are widely used in the prevention of electronic appliances furniture, ceramic glass at the bottom of the wood and metal products, such as by scratching by the friction loss, also can reduce the noise of moving objects produced, compensate for electrical appliances, furniture a rough feet, at the same time to have prevent slippery, shockproof, buffer, and many other benefits.

tag: EVA sole
Professional custom shoe insoles also understand that when you're working with custom shoe insoles product, it's important to understand that quality of custom shoe sole always matters.
Do you want custom shoe insoles custom shoe sole? We also have custom shoe insoles. visit BEF Shoes Material to know more.
With this competency, GuangZhou BEF Shoes Material Co.,ltd provide high technology and assist customers to create added value and contribute to the development of producing custom shoe sole.
Custom message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...