General labor insurance shoes has three big effect

Labor insurance shoes is a kind of safe protection against the foot of shoes. Its types are many, such as protection of digit, puncture proof, insulation, acid and alkali resistant, etc. The general labor insurance shoes has three major functions? A, baotou shock resistance with the weight of the steel impact hammer impact test, baotou baotou when the clearance height should be less than specified value, and the axis of the baotou in the test should not be any penetrating crack. It is worth noting that the national standard of the weight of shock hammer, specifications, impact height and the regulation of the structure of the testing machine and so on are different, should distinguish between actual test. Second, puncture resistance testing machine is equipped with a pressure plate, pressure plate is equipped with nail test, in test nails for a cut to the head of the tip, nail head hardness should be greater than 60 HRC. Put sole sample machine chassis, position can make the nail pierced through the outsole test, the test pin to 10 mm/min & plusmn; 3 mm/min speed puncture the soles, until penetration, record the strongly required. Four points for each soles choice test ( At least one point in the heel) , various points not less than 30 mm apart, and from the inner bottom edge distance is greater than 10 mm. Has non-slip bottom, should be pierced between blocks. Four points of the two points should be from the planting base stare blankly in 10 - edge line 15 mm distance test. If the humidity will affect the results, the test should be before the sole in 20 ℃ & plusmn; 2 ℃ deionized water in 16 & plusmn; 1h。 Three, the electrical properties of conductive shoes and anti-static shoe by adjusted in the dry and wet air, the clean steel ball filled people inside the shoe and into the metal probe device, using resistance test instrument, measuring the front two resistance between the probe and third probe. In general, the conductive shoes requirement should not be greater than l00K ohm resistance; Anti-static shoes for resistance should be between 100 k ohms to 1000 m ohm.
GuangZhou BEF Shoes Material Co.,ltd has various branches in different countries worldwide.
GuangZhou BEF Shoes Material Co.,ltd strives to reflect the highest ethical standards in our relationships with members, providers, and shareholders.
GuangZhou BEF Shoes Material Co.,ltd might focus its marketing efforts by highlighting its end product—improved technology and increased profits—not its producing methods.
custom shoe sole is receiving a great positive feedback in the market. And many of our clients are fully satisfied with it.